🔌 Laptop Not Charging? Fix Battery & Power Issues Easily!

 ⚡ Laptop Plugged in But Not Charging? Here’s How to Fix It!


Is your laptop not charging even when plugged in? Learn how to fix charging problems, troubleshoot power issues, and improve battery life with these expert solutions.

🔍 Why Is My Laptop Not Charging?

Laptop showing "Plugged in, Not Charging" warning
Learn how to fix a laptop that won’t charge.


If your laptop is plugged in but not charging, there could be several reasons behind the issue:
✅ Faulty charging cable or adapter
✅ Loose or damaged charging port
✅ Battery driver issues
✅ Overheating causing charging stops
✅ Battery reaching end of life

But don’t worry! Follow these tested solutions to fix laptop charging issues.

1️⃣ Check the Charging Cable & Power Adapter

Person inspecting a laptop charger for damage
A faulty charger can stop your laptop from charging.


The first step is to inspect your charger and adapter.

🔍 How to Check for Charger Issues:

  1. Inspect the power cord for cuts, bends, or damage.

  2. Try a different wall socket to rule out power outlet issues.

  3. Use another charger (if available) to test.

  4. If the charging adapter gets too hot, it may be faulty.

💡 Pro Tip: Avoid using third-party chargers that do not match your laptop’s power rating.

2️⃣ Check the Laptop Charging Port

Person cleaning laptop charging port with compressed air
Dust in the charging port can block power flow.


Sometimes, the charging port gets loose or dirty, preventing a good connection.

🛠 Steps to Fix Charging Port Issues:

  1. Turn off your laptop and unplug it.

  2. Use compressed air to remove dust inside the charging port.

  3. Check if the port is loose or wobbly – if so, it may need repair.

  4. Plug the charger in firmly and see if the laptop detects power.

💡 Pro Tip: If your laptop charges only when holding the charger at an angle, the port is likely damaged and needs repair.

3️⃣ Reset Battery & Power Management Settings

Windows Device Manager with battery driver highlighted
Uninstalling the battery driver can fix charging problems.


A software glitch in battery drivers or power management settings can cause charging issues.

⚙️ Steps to Reset Battery Drivers:

  1. Press Win + X and select Device Manager.

  2. Expand Batteries and right-click Microsoft ACPI-Compliant Control Method Battery.

  3. Click Uninstall device, then restart your laptop.

  4. Windows will reinstall the battery driver automatically.

💡 Pro Tip: This step resets charging recognition and often fixes battery issues.

4️⃣ Check Battery Health Using Windows Tools

Screenshot of a Windows battery report
Windows battery report shows wear level and performance.


A dying battery may prevent proper charging.

🛠 Steps to Check Battery Health:

  1. Press Win + X → Open Command Prompt (Admin).

  2. Type:

    bash
    powercfg /batteryreport

  3. Press Enter and go to C:\Windows\System32\battery-report.html to view the report.

💡 Pro Tip: If the "Battery Wear Level" is over 50%, you should replace the battery.

5️⃣ Cool Down Your Laptop to Resume Charging

If your laptop gets too hot, it may stop charging as a safety measure.

🌡️ Steps to Reduce Overheating:

  1. Turn off the laptop and let it cool for 30 minutes.

  2. Place the laptop on a hard, cool surface (avoid beds or cushions).

  3. Clean the cooling vents using compressed air.

  4. Use a cooling pad to keep temperatures low.

💡 Pro Tip: If your laptop battery charges only when it's cool, overheating is the issue.

6️⃣ Perform a Battery Calibration

Laptop batteries sometimes show incorrect charge levels.

🛠 Steps to Calibrate Your Laptop Battery:

  1. Charge your laptop to 100%.

  2. Keep it plugged in for 2 hours after full charge.

  3. Unplug the charger and use the laptop until it fully drains.

  4. Let it rest for 2 hours before plugging it back in to charge.

💡 Pro Tip: Battery calibration helps improve charging accuracy.

7️⃣ Update BIOS & Power Management Settings

Screenshot of a BIOS update screen
A BIOS update can fix laptop charging recognition issues.


A BIOS update can fix charging recognition issues.

⚙️ How to Update BIOS:

  1. Visit your laptop brand’s website (Dell, HP, Lenovo, etc.).

  2. Search for the latest BIOS update using your model number.

  3. Follow instructions to install the update carefully.

💡 Warning: Updating BIOS incorrectly can damage your laptop, so follow official guidelines.

🎯 Final Thoughts – Fix Your Laptop Charging Issues!

By following these step-by-step solutions, you can easily troubleshoot & fix laptop charging problems.

📌 Quick Summary:
✅ Check the charger & power adapter for damage
✅ Clean the charging port & test for looseness
✅ Reset battery drivers in Device Manager
✅ Check battery health using Windows tools
✅ Prevent overheating to avoid charging stops
✅ Calibrate your battery for accurate charge levels
✅ Update BIOS for better power management

Did these fixes help you? Comment below! 💬

Comments

Post a Comment

Popular posts from this blog

Torque settings mains big ends head

Image
 what are the torque settings for bearing mains,big ends and head cylinder bolts BIG END, MAINS AND CYLINDER HEAD TORQUE SETTINGS FOR 2.4 LITRE JEEP CHEROKEE 2003 MODEL Tighten the cylinder head bolts in the sequence shown. Using the 4 step torque turn method, tighten according to the following values: Step 1: All to  34 Nm (25 ft. lbs.) Step 2: All to  68 Nm (50 ft. lbs.) Step 3: All to  68 Nm (50 ft. lbs.) CAUTION:  Do not use a torque wrench for the following step. Step 4: Turn an additional  1/4 turn Step 5: Install and tighten bolts (1-10) in sequence shown, to  41 Nm (30 ft. lbs.)  . Tighten bolts (1-10) again to  41 Nm (30 ft. lbs.) PLUS 1/4 turn  in sequence shown. Install main bearing bedplate to engine block bolts (11-20), and torque each bolt to 28 Nm (20 ft. lbs.) in sequence shown. Connecting Rod Cap Bolts 54 Nm (40 ft. lbs.) + 1/4 turn 1997 Jetta: Torque settings..vw..the head, fly w...
Read more

2003 E46 320d Torque settings required

2003 E46 320d Torque settings required Cylinder Head, Big ends and main bearings, Flywheel  2003 320d M47 engine. Head bolts 1.40Nm 2. 80Nm 3 Slacken off 180 degrees 4. 50Nm 5 +90 degrees 6.+90 degress On new head bolts... Main bearings 1. 22Nm 2, +90 degrees On new bolts... Big ends 1. 5Nm 2. 20Nm +70 degrees On new bolts.... Flywheel 105Nm
Read more

Honda CR-V hood release cable broken

Image
CRV hood release cable is broken, How do you reconnect the top of the hood release cable when the hood wont open You can see the cable if you pull on the hood as far as it will go 2002 CRV hood release cable is broken, or disconnected at the latch end How can I open the hood If it's loose it either broke at the cable or the end piece. You have to get to the back of the latch and move the release arm. I usually try and get under the vehicle and remove the plastic splash shield from the bottom and get a long screwdriver or something I can fish up from the bottom to that arm to "pop" it open. Here's a couple pictures showing the release arm and latch so you can see where they are located. The release arm (marked B) will release the primary latch. Then you can release the second safety latch like normal. That arm needs to come down . I have this extra long radiator hose pick that's angled just right to grab it and then I pull down to pop it.  in t...
Read more