leaderboard 1

Showing posts with label speedometer. Show all posts
Showing posts with label speedometer. Show all posts

Monday 20 November 2023

Over drive light on/off problem

 O/D LIGHT TURNING ON AND OFF 

OVER DRIVE LIGHT ISSUE IN MY CAR

What Does O/D Off Light Mean?

Vehicles with Automatic transmission  have the Overdrive (O/D) function which allows a driver to drive faster or with high speed on the road. Out of all the gears the o/d is the highest gear in an automatic transmission. The overdrive function reduces the engine’s revolutions per minute (RPM) down to a certain speed to aid in acceleration and make the vehicle more fuel-efficient.


Many car drivers often mistake the o/d off state when the light is off, but the opposite is when its indicator light is on. Let’s find out the difference between when the overdrive function light is on or not and its meaning.

What Does O/D Off Mean In A Car?

Now understand this first. The o/d signifies the top gear or gears in a car’s transmission. The o/d off button allows you to prevent an automatic message from shifting into those top gears in certain situations, such as when driving through rough hills, going down steep terrain, and hauling a heavy load or trailer.


When the overdrive gets turned off, the car will not allow the transmission to operate in the highest gear but limits it to a lower gear to increase friction to ensure safety and save fuel.

Simply put, when the default o/d function is OFF (the indicator light is on the dashboard), all gears in the transmission are in use. Still, when the indicator light is off, this means your vehicle is setting the overdrive On state to allow you to accelerate over the limit again.

When turning the overdrive OFF, you need to control the transmission so as not to switch to the highest gear, but only up to the level with a 1:1 gear ratio to stop.

Now If you notice Overdrive light flashes after hard shift from first to second gear.


This sounds like you have a shaft speed sensor that is out. Does the speedometer work? If not here is the location of the vehicle speed sensor.

see images below to locate speed sensor on your vehicle



If you hear a grind when it shifts, you do have a tranny problem, the lean condition can be any type of vacuum leak that allows unmetered air into the intake manifold, or a weak fuel pump.



How To Use Overdrive Switch or Button?

Before enabling or disabling overdrive, you should carefully identify the situations in which you might use it. This switch will stay open by default unless turned off. 

As a result, the driver can achieve a reasonable speed both in high-speed driving and on normal roads. The efficient use of this function will help prolong the life of your car’s engine and put less strain on the powertrain.

How To Turn Off The Overdrive(O/D)?

Although the overdrive function gets used when driving in rough terrains, the overdrive should get turned off in such a situation. For instance, if you are driving up a hill or downhill or the road is bumpy, this feature has to get disabled.

The vehicle manufacturer will design an o/d off button or switch on the gear lever, and this indicator light should be observed. If the light does not come on, this function is active.

In other vehicles with this pre-designed button, your task is to simply press the off button. Meanwhile, with non-engineered cars, you need to manually select a lower gear to perform the turn-off overdrive operation.

Vehicles with automatic transmissions with manual gear shifts and those with paddle shifters can switch to a lower gear to disable the overdrive function.

When The O/D Off Indicator Flashes

If the overdrive indicator light flashes, the o/d function has to get disabled. Note that when the indicator light is on, the o/d is off, and when the light is off, this means the overdrive feature is on.

Some problems that include damaged control solenoid valves, automatic fluid leakage, or automatic fluid blockage during exchange can cause the overdrive indicator light to blink.

When To Turn Off Overdrive

As a driver when there is no need to accelerate, the overdrive function should be turned off. Also, when driving up a hill or downhill, the overdrive function may lose its effectiveness.

When shifting to a lower gear, turn the overdrive feature off. Your car will then immediately shift gears, and this would give the driver better control of the engine brake and gear shifts more effectively.

Summary

The O/D off button allows you to prevent an automatic message from shifting into those top gears in certain situations, such as when driving through rough hills, going down steep terrain, and hauling a heavy load or trailer.

When the overdrive gets turned off, the car will not allow the transmission to operate in the highest gear but limits it to a lower gear to increase friction to ensure safety and save fuel.

Before enabling or disabling overdrive, you should carefully identify the situations in which you might use it. This switch will stay open by default unless turned off. Although the overdrive function gets used when driving in rough terrains, the overdrive should get turned off in such a situation.

If the overdrive indicator light flashes, the o/d function has to get disabled. Note that when the indicator light is on, the o/d is off, and when the light is off, this means the overdrive feature is on. When shifting to a lower gear, turn the overdrive feature off. Your car will then immediately shift gears, and this would give the driver better control of the engine brake and gear shift more effectively.


Monday 6 June 2016

2004 Nissan maxima speedometer and odometer not working

Speedometer And Odometer Not Working


my 2004 Nissan maxima 3.5 SE speedometer and odometer stopping working...Every thing else on the cluster still works

 I went to auto zone and there scanner tool said P1574


Solution for this problem:
This is your Vehicle speed sensor , with both not working to tells me the speedometer ? cluster is okay .
The code also indicated the VSS .
Replace the sensor and it will start to work again /
Which one of the trans speed sensors did you replace .


Okay there are three sensors output input and vehicle speed sensor .
Was this the one replaced if not replace this sensor . 

this is back near the engine ,looks like you replaced the turbine speed sensor .
The one you need to replace is the sensor marked with a red oval ring