leaderboard 1

Showing posts with label alldata. Show all posts
Showing posts with label alldata. Show all posts

Tuesday 5 February 2013

Evaporator Coil Replacement

 Replacement Evaporator Coil For Jeep Cherokee



Q: A query from inexperienced mechanic, I was wondering if I am able to replace the evaporator coil for 1996 Jeep Grand Cherokee with a 5.2 liter engine. Where can I find complete instructions on how to do it?
Please Help !!!!!!!!!!!!!


A: First, you would have to define inexperienced. I’m a believer that anyone can do about anything they put their mind to. The main tools you’ll need for a job such as replacing an A/C evaporator in your Jeep is patience, attention to detail and information. Information can be found but the detailed information you need, to maintain patience, will need to be borrowed or bought. You can purchase factory information and diagrams on-line. An example would be found at alldata.com. ALLDATA Information Systems has a Do It Yourself (DIY) section that allows you to purchase vehicle specific information. If you want to DIY this job, be organized. Have information and allow plenty of time. If you’re inexperienced, tackling a job like replacing an A/C evaporator without good information will have you throwing tools down the driveway. In which case, you should park your Jeep to allow for easy access for the wrecker, in the event you throw all your tools down the driveway.

Monday 4 February 2013

Vehicle Shudders while going Uphill


Jeep Grand Cherokee, shuddering

Q: Its the 1996 Jeep Grand Cherokee with 72K. All routine maintenance performed regularly without any missed. The vehicle is in great working order except for the following problem. Our check engine light keeps coming on when accelerating up hills at 55+mph. When we are about at the crest of a hill the light starts flashing then when the vehicle starts to down shift it starts shuddering real bad. This shuddering will last until you back off the gas and slow down. We have had the valve springs replaced, then had the mechanics do some work (because of the codes thrown) and this last week a new computer was installed. Two days after the computer was replaced the check engine light came back on under these same conditions. What could be the problem?

A: ALL DATA IS GREAT SOURCE. Join ALLDATA.The ALLDATA Information System shows several Technical Service Bulletins (TSB’s) that are related to driveability problems with check engine lights coming Here is the procedure explained for you to understand.
on.

The computer will report information to the technician that is not valid and send him/her down the wrong diagnostic path. With the recent replacement of the vehicle’s computer I would hope you got the latest and greatest software update. No, your Jeep isn’t running on Windows 98. If the computer is up to speed then the concerns move to the ignition and fuel system. If the problem is happening as the transmission down shifts and the engine RPM jumps higher than the norm, there may be a problem with the ignition wires. Strange as it may seem, we’ve found that under load and high engine RPM tired spark plug wires will introduce an immensely confusing engine skip that will not only turn the check engine light on, it also sends the computer into the high alert mode causing the check engine light to blink. The blinking check engine light on most ‘96 and up vehicles is the computer attempting to alert the driver to the pending doom of the catalytic converter. In closing, do not ignore the fuel system as a possible cause. A fuel pressure gauge should be installed and the vehicle driven in a manner that causes the engine to go into convulsions. Only then could you be sure of the abilities of the fuel pump. The fix will likely be simple. It’s finding the cause that will drive you nutz.