leaderboard 1

Saturday 22 March 2014

Electrical switches on driver's door do not work.

Problem with 2004 Chevrolet Silverado 2500HD


The power window switches, side view mirror controls and automatic door lock isn't working on the driver's side. The radio does not continue playing after the truck is shut off. there is not a warning "ding" when the key is left in the ignition.


Look inside the rubber boot between and near the boot that goes from the door and the door jamb for broken wires all the circuits you are having a problem with are in there

2007 Toyota Yaris Manual?

Offside door mirror has continuous ratcheting action, after being knocked.

Problem with 2007 Toyota Yaris


The offside door mirror has been knocked and now the electrics are playing up, so every time we switch the ignition on the complete mirror unit is powered and just performs a continuous ratcheting action. This can only be solved by holding the unit firm for a short period. Toyota say the only repair option is a new unit at $700! The glass adjusting motor still works as does the folding action.



Sounds like the main motor mount pin is snapped.
Unfortunately they are right, you will need to replace the mirror unit complete.

That said, I wouldn't be paying $700. Ring around wreckers and get a 2nd hand one. You'll likely find one in the right color for your vehicle..

Insufficient Permission

Problem with Network Software & Management Tools


I had the same problem. I'm trying to install OS X MOUNTAIN LION in VMware Workstation 8.3 for Windows. In the end, when I try to run the virtual machine an error telling me that I have access denied for insufficient permissions. I'm already working as an administrator. Have click Run as administrator. I've tried changing the READ ONLY and the system allows not change. I believe not change by being in the mounted image. I think it must be some locking system that is not allowing. What can I do?? I'm waiting. Thank you very much.

I've already changed NFS permissions and nothing

Throttle position sensor noisy

Problem with Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles


Just had a set of Vance and Hines true duel pipes fited and a high flow HD air filter along with a retune using a screaming eagle race tuner problem is that now what sounds like the throttle position sensor is very noisy when i turn the ignition on ( sounds like it is going to full on and back to off ) , is this due to the retune , the lack of the original air filter back or is the position sensor on the way out . The bike seems to running ok starts well and definatly has more low to mid range power and the bonus of better fuel economy , the engine fault light and security light both go out after the prescribed 4 secs so there seems to be no faults , bike is a 2007 FLHTCU .

Add your solution for this problem to help others